Puffer tote

■ Pattern sheet x1 (tracing required) ■ Instruction sheet ■ Outer fabric: 0.5m x 110cm wide ■ Lining fabric: 0.8m x 110cm wide ■ Bonded Fleece Lining (duoline): 0.8m ■ 38mm cotton webbing (1 x 140cm,1

■ Needlecord fabric: 0.5m ■ 17cm zip: 1 ■ 1.2 m of webbing strap per pouch ■ Bag clip and triangle ring: 2 ■ Matching thread ■ Basic sewing kit ■ Seam allowance is 1cm, unless otherwise stated. ■ To m

NOTES ■ Seam allowances are ⅝in, unless otherwise noted. ■ Press seams to one side, unless otherwise instructed. ■ RST = right sides together. ■ WST = wrong sides together. CUTTING OUT 1 From the main

■ 1-2m of 140cm wide needlecord, corduroy, velvet or denim ■ 1 x 40cm invisible zipper ■ 2m bias binding ■ Tape measure, straight ruler and curved ruler ■ Fabric marking tools ■ Matching thread ■ Basi

■ Pattern sheets x2 (Tracing required) ■ Instruction sheet Lining fabric (all sizes): ■ Long length: 3.5mx115cm 2.5mx140cm ■ Short length: 3mx112cm 2.3mx140cm Net overlay fabric (all sizes, 140cm only

The bag strap is knitted in Fabric Stitch first, then the stitches for each side of the bag are picked up from the WS edge of the strap, to form an outside ‘seam’. These stitches are then worked in Tw