Pinup 

The bag strap is knitted in Fabric Stitch first, then the stitches for each side of the bag are picked up from the WS edge of the strap, to form an outside ‘seam’. These stitches are then worked in Tw

■ Pattern sheet x1 (tracing required) ■ Instruction sheet ■ Outer fabric: 0.5m x 110cm wide ■ Lining fabric: 0.8m x 110cm wide ■ Bonded Fleece Lining (duoline): 0.8m ■ 38mm cotton webbing (1 x 140cm,1

■ Needlecord fabric: 0.5m ■ 17cm zip: 1 ■ 1.2 m of webbing strap per pouch ■ Bag clip and triangle ring: 2 ■ Matching thread ■ Basic sewing kit ■ Seam allowance is 1cm, unless otherwise stated. ■ To m

1 From the lining fabric, cut the following: ■ One (1) 23in x 39in rectangle for the bag body. ■ Two (2) 11in x 10in rectangles for the end panels. ■ One (1) fat quarter for the bias binding. 2 From t

NOTES ■ Seam allowances are ⅝in, unless otherwise noted. ■ Press seams to one side, unless otherwise instructed. ■ RST = right sides together. ■ WST = wrong sides together. CUTTING OUT 1 From the main

If you’re used to working with cross stitch kits, you’ll be familiar with the concept of having everything you need ready to start stitching straight away. But when you’re following a counted chart, l