UNDER £100
1 Start by clearing the floor area that needs to be painted, which may be easier said than done, especially if you have nowhere to move a workbench and tool cabinet, but they need to be out of the way.
2 Clean from the top down to reduce the risk of dust contamination, so brush down shelves and doors. You can’t remove all the dust in the air, but the less there is, the less that will settle on the fresh paint when it’s drying.
3 Brush around the edges of the floor where the paint will be applied. This needs to be as clean as possible to ensure the paint can stick to the floor and not lift due to a layer of dirt and dust.
4 Finally, use a large sweeping brush to gently brush out all the remaining dirt. Don’t do this too quickly because it will cause dirt and dust to rise into the air and settle back on to the floor.
5 Look for any oil stains on the floor that may mean the paint won’t stick to the surface. Clean them off with brake cleaner or a degreasant, then wipe over them with a cloth and brush up any dirt.
6 If you have panel wipe, clean the surface of the floor with it to remove any remaining traces of dirt. Carefully brush the floor one more time, then you are ready to apply the paint.
7 Use a brush to paint over any tight corners where a roller cannot gain access. Make sure the tin of paint has been sufficiently stirred before you start and check the advice for the recommended ambient temperature.
8 Applying the paint with a roller is far quicker than using a brush. Depending on the type of paint, several coats may be required, in which case, the first coat won’t need to be too thick.
9 Paint your way out of the garage to avoid the risk of standing on the fresh paint. Leave the paint to dry for the recommended time – in some cases, vehicles should not be driven over the floor for the f
